Buildora

Bathtub Liner Review: Pros, Cons, and Costs

Bathtubs can last for decades. But along the way, acrylic or fiberglass tubs and showers may crack or develop blemishes, and cast iron or enameled steel tubs can rust, chip, or crack.

If you're not ready to replace the tub, it can be refinished. Another option is to install a bathtub liner: a solid unit that's the shape of your bathtub, just a little smaller.

What a Bathtub Liner Is

A bathtub or shower liner is a solid, single piece of acrylic or PVC plastic that fits inside of a bathtub, as a kind of second bathtub. The bathtub liner matches the contours of the bathtub. It seamlessly meets up with the drain hole, walls, and floor so that it looks just like a conventional bathtub.

Unlike refinishing, in which a spray coating of epoxy, urethane, or polymer material is applied, a liner is a solid unit that is molded in a factory, and then installed inside a bathtub. Since the tub liner is not a spray coating, it cannot be scratched off.

Bathtub liners come in two parts: a bottom unit that fits over the bathtub or shower pan, and an optional upper section, the surround, that extends from the edge of the bathtub or shower pan up the walls.

Pros

Quick
Minimal mess
No demolition
Cannot scratch off

Cons

Trapped water
Covers up problems
Makes tub smaller
Removal difficult

Pros

Bathtub liners are a faster fix than completely demolishing and replacing a bathtub. Not only that but liners cover up wall surround issues. Liners extend above the bathing area and up the walls.

Bathtub liners require no demolition. Tub and shower liner installation does come with some off-gassing from the adhesive used to attach the liner to the tub or shower, but the smell is considerably less than those produced by spray refinishing processes.

Cons

Bathtub liners mask but fail to correct underlying problems. The moisture in bathrooms can create mold and can even eat away at structural elements. These problems remain if they are not addressed before a liner is installed.

Bathtub liners can trap water. Should any water become trapped between the lower surface and the liner, this can create an environment for mold and mildew to grow.

Cost

The cost of a bathtub liner ranges from $700 to $3,200, for an average cost of about $2,000.

The cost of installing a bathtub liner includes leveling and preparing the current tub; installing the tub liner; connecting the plumbing and making sure it works; and disposing of materials.

Maintenance and Repair

Because water infiltration is a constant concern, keep all caulked seams in good condition. Re-caulk these seams as necessary. Keep the escutcheon around the shower controls tight and maintain the caulk.

Design

Bathtub liners are smaller than the bathtub. To fit into the bathtub, the bathtub liner must be smaller, so this reduces the width, depth, and length of the bathtub basin.

Bathtub liners are often installed with prefabricated wall surrounds. Since the look of the wall surround influences the overall look of the bathroom, it can be left off if the surround is in good condition.

Liners may feel weak, spongy, or less than stable underfoot. Because you are adding a layer of material, your bathtub inside will become slightly smaller when you use a liner.

Installation

Do-it-yourself bathtub or shower liner installation is not only difficult but access to bathtub liners is limited. Call a bathtub liner company to do the work.

Measure the tub: When you contract with a firm to install a liner, a technician will visit to take precise measurements and photos of the bathtub or shower unit.
Order the liner: An exact shell of the bathtub unit is made from 1/4-inch thick ABS or PVC, using vacuum-form technology. The acrylic shell is similar to the material used in many tub and shower units but is a thinner material. It can take as much as eight weeks for the shell to be prepared.
Install the liner: Once the liner is delivered to the site, installation takes just a few hours. First, the old fixtures and drain fittings are removed, then the shell is inserted right over the old tub or shower unit, using silicone adhesives and two-sided tape.

Finish the installation: New drain, overflow, stopper, and faucet fixtures are installed, and the work area is cleaned up. The complete installation of the tub or shower liner usually takes about one day.